SG-9101CG 24.000MHz C07PHAAA

Crystal oscillator CRYSTAL OSCILLATOR (Programmable) SPREAD SPECTRUM OUTPUT: CMOS Product Number (please contact us) SG-9101CA: X1G005301xxxx00 SG-9101CB: X1G005311xxxx00 SG-9101CE: X1G005321xxxx00 SG-9101CG: X1G005291xxxx00 SG - 9101 series • Frequency range : 0.67 MHz to 170 MHz (1 ppm Step) • Supply voltage : 1.62 V to 3.63 V • Function : Output enable (OE) or Standby (ST ¯¯) • Down or Center spread modulation • Configurable spreading 3 modulation profile (Hershey-kiss, Sine-wave, Triangle), 4 modulation frequency, 6 spread percentage • Package : 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 (mm) • PLL technology to enable short lead time • Available field oscillator programmer “SG-Writer II” CG CE CB CA Specifications (characteristics) Item Symbol Supply voltage VCC Specifications 1.80 V Typ. Conditions/Remarks 2.50 V Typ. fo 0.67 MHz to 170 MHz T_stg Operating temperature T_use Frequency tolerance*1 f_tol -40 ºC to +125 ºC -40 ºC to +85 ºC -40 ºC to +105 ºC ±50 × 10-6 3.5 mA Max. 3.6 mA Max. 3.4 mA Max. ICC 2.9 mA Typ. 5.7 mA Max. 6.0 mA Max. 4.9 mA Typ. Output disable current I_dis Standby current I_std Symmetry SYM VOH Storage as single product. 3.0 mA Typ. 3.2 mA Typ. Average frequency of 1s gate time. T_use = +105 ºC No load, fo = 20 MHz T_use = +25 ºC 6.9 mA Max. 8.3 mA Max. T_use = +105 ºC 5.9 mA Typ. 7.0 mA Typ. T_use = +25 ºC 3.7 mA Max. VOL Input voltage Rise and Fall time 3.4 mA Max. 3.5 mA Max. 3.7 mA Max. OE = GND, fo = 170 MHz 0.9 μA Max. 1.0 μA Max. 1.5 μA Max. 2.5 μA Max. T_use = +105 ºC 0.3 μA Typ. 0.4 μA Typ. 0.5 μA Typ. 1.1 μA Typ. T_use = +25 ºC 45 % to 55 % ST ¯¯ = GND 50 % VCC Level IOH/IOL Conditions Rise/Fall time 90 % VCC Min. Default (fo > 40 MHz), Fast 15 pF Max. L_CMOS VIH 70 % VCC Min. VIL 30 % VCC Max. tr/tf OE or ST ¯¯ fo > 40 MHz 6.0 ns Max. fo ≤ 40 MHz 3.0 ns Max. fo = 0.67 MHz to 170 MHz 10.0 ns Max. t_stp Enable Time Resume Time t_sta 1 μs Max. t_res 3 ms Max. Start-up time t_str 3 ms Max. [mA] *A *B *C *D -2.5 -3.5 -4.0 -5.0 - 3.0 ns Max. Disable Time Vcc IOH IOL 2.5 3.5 4.0 5.0 IOH -1.5 -2.0 -2.5 -3.0 Default (fo ≤ 40 MHz) IOL 1.5 2.0 2.5 3.0 IOH -1.0 -1.5 -2.0 -2.5 Slow IOL 1.0 1.5 2.0 2.5 *A：1.62 V to 1.98 V, *B：1.98 V to 2.20 V, *C：2.20 V to 2.80 V, *D：2.70 V to 3.63 V 10 % VCC Max. Default Fast Slow No load, fo = 170 MHz 3.4 mA Max. Output voltage (DC characteristics) Output load condition - 1.62 V to 1.98 V 1.98 V to 2.20 V 2.20 V to 2.80 V 2.70 V to 3.63 V Output frequency range Storage temperature Current consumption 3.30 V Typ. 20 % - 80 % VCC, L_CMOS = 15 pF fo = 0.67 MHz to 20 MHz Measured from the time OE or ST ¯¯ pin crosses 30 % VCC Measured from the time OE pin crosses 70 % VCC 1 μs Max. Measured from the time ST ¯¯ pin crosses 70 % VCC Measured from the time VCC reaches its rated minimum value, 1.62 V *1 Frequency tolerance includes initial frequency tolerance, temperature variation, supply voltage variation, reflow drift, load drift and aging (+25 ºC, 1 year). Spread spectrum configuration ⑤Code 02 C: Center spread modulation Spread percentage 0.25 % ⑤Code 05 D: Down spread modulation Spread percentage -0.5 % Modulation frequency: 25.4 kHz (default), 6.3 kHz, 8.5 kHz, 12.7 kHz ④ 05 07 10 15 0.5 % 0.75 % 1.0 % 1.5 % 10 15 20 30 -1.0 % -1.5 % -2.0 % -3.0 % Modulation profile: Hershey-kiss (default), Sine-wave, Triangle Product Name SG-9101CG 170.000000MHz C 20 P H A A A ②Package Type CA: 7.0 mm x 5.0 mm ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ CB: 5.0 mm x 3.2 mm CE: 3.2 mm x 2.5 mm ①Model, ②Package type, ③Frequency, CG: 2.5 mm x 2.0 mm ④Spread type, ⑤Spread percentage code, ⑥Function, ⑦Operating temperature, ⑧Modulation frequency, ⑨Modulation profile, ⑩Rise/Fall time 20 2.0 % 40 -4.0 % ④Spread type ⑦Operating temperature ⑨Modulation profile C: Center spread D: Down spread G: -40 °C to +85 °C H: -40 °C to +105 °C ⑥Function ⑧Modulation frequency A: Hershey-kiss (default) B: Sine-wave C: Triangle P: Output enable S: Standby A: 25.4 kHz (default) B: 12.7 kHz C: 8.5 kHz D: 6.3 kHz ⑩Rise/Fall time A: Default B: Fast C: Slow Crystal oscillator Pin description Pin Name I/O type OE Input Output enable ST ¯¯ Input Standby GND OUT VCC Power Output Power 1 2 3 4 External dimensions High: Low: High: Low: Function Specified frequency output from OUT pin Out pin is low (weak pull down), only output driver is disabled. Specified frequency output from OUT pin Out pin is low (weak pull down), Device goes to standby mode. Supply current reduces to the least as I_std. Ground Clock output Power supply (Unit: mm) Footprint (Recommended) SG-9101CG SG-9101CG SG-9101CE SG-9101CE SG-9101CB SG-9101CB SG-9101CA SG-9101CA (Unit: mm) ■Notes: In order to achieve optimum jitter performance, the 0.1 μF capacitor between VCC and GND should be placed. It is also recommended that the capacitors are placed on the device side of the PCB, as close to the device as possible and connected together with short wiring pattern. Crystal oscillator Specification Graph (Typical supplemental specification. Unless otherwise specified T_use = 25 ºC, L_CMOS = 15pF) Current Consumption L_CMOS = No load 8 7 12 6 10 Icc (mA) 5 Icc (mA) L_CMOS = 15 pF 14 4 8 6 3 4 2 Vcc = 3.3 V 1 Vcc = 2.5 V Vcc = 3.3 V Vcc = 2.5 V 2 Vcc = 1.8 V Vcc = 1.8 V 0 0 0 50 100 150 0 200 50 100 150 200 fo (MHz) fo (MHz) Output disable current Standby current 3.5 3 I_dis (mA) 2.5 2 1.5 1 Vcc = 3.3 V 0.5 Vcc = 2.5 V Vcc = 1.8 V 0 0 50 100 150 200 fo (MHz) ■Notes: Spread percentage : ±2.0 %, Modulation frequency : 25.4 kHz, Modulation profile : Hershey-kiss Specification Graph (Typical supplemental specification. Unless otherwise specified T_use = 25 ºC, L_CMOS = 15 pF) Cycle-to-Cycle Jitter Peak-Peak 180 Rise/Fall time = Fast 160 Rise/Fall time = Slow 140 120 100 80 60 40 20 220 Vcc = 2.5 V 200 Rise/Fall time = Default Cycle to Cycle Jitter Peak - Peak (ps) Cycle to Cycle Jitter Peak - Peak (ps) 220 Vcc = 1.8 V 200 180 Rise/Fall time = Fast 160 Rise/Fall time = Slow 140 120 100 80 60 40 20 0 0 0 20 40 60 80 100 fo (MHz) 120 140 160 180 Vcc = 3.3 V 200 Rise/Fall time = Default Cycle to Cycle Jitter Peak - Peak (ps) 220 Rise/Fall time = Default 180 Rise/Fall time = Fast 160 Rise/Fall time = Slow 140 120 100 80 60 40 20 0 0 20 40 60 80 100 fo (MHz) 120 140 160 180 0 20 ■Notes: Spread percentage : ±2.0 %, Modulation frequency : 25.4 kHz, Modulation profile : Hershey-kiss 40 60 80 100 fo (MHz) 120 140 160 180 Crystal oscillator Spread Spectrum Specification Graph Spread Spectrum Profile fo : 170 MHz / Spread spectrum : ±2.0 % / Modulation frequency : 25.4 kHz Hershey-kiss Sine-wave Triangle Harmonics Specification Graph (Typical supplemental specification. Unless otherwise specified T_use = 25 ºC, L_CMOS = 15 pF, VCC = 3.3 V) Harmonics spectrum (fo = 20 MHz) No spread spectrum Center spread ±2.0 %, Hershey-kiss, 25.4 kHz 20 20 ① 10 10 ③ ⑤ 0 ⑦ ⑨ ③ -10 Power (dBm) -10 Power (dBm) ① 0 ⑪ -20 -30 -40 ⑤ ⑦ -20 -50 -60 -60 -70 -70 -80 0 40 80 120 160 200 240 280 320 360 0 400 40 80 120 160 200 240 280 320 frequency (MHz) frequency (MHz) Modulation profile Modulation frequency 0 0 fo = 100 MHz Hershey-kiss -10 fo = 100 MHz Sine-wave -20 fo = 100 MHz Triangle fo = 100 MHz 25.4 kHz -10 Attenuation (dBc) Attenuation (dBc) ⑪ -40 -50 -80 -30 -40 -50 -60 fo = 100 MHz 6.3 kHz -20 -30 -40 -50 -60 -70 -70 1 3 5 7 9 11 1 Harmonics Odd Order 3 5 7 9 11 Harmonics Odd Order Spread percentage Output frequency 0 0 fo = 100 MHz ±2.0 % -10 fo = 170 MHz -10 fo = 100 MHz ±1.0 % fo = 100 MHz ±0.25 % -20 -30 -40 -50 -60 fo = 100 MHz Attenuation (dBc) Attenuation (dBc) ⑨ -30 -20 fo = 20 MHz Tr/Tf = fast -30 -40 -50 -60 -70 -70 1 3 5 7 9 11 Harmonics Odd Order ■Notes: Harmonics order attenuation is normalizing to no-spread spectrum mode. 1 3 5 7 Harmonics Odd Order 9 11 360 400 Crystal oscillator Specification Graph (Typical supplemental specification. Unless otherwise specified T_use = 25 ºC, L_CMOS = 15 pF, VCC = 3.3 V) Rise/Fall Time (fo = 20 MHz) Rise time L_CMOS = 5 pF 5 4.5 4 Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast 4.5 4 3.5 Fall Time(ns) 3.5 Rise Time(ns) Fall time L_CMOS = 5 pF 5 Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast 3 3 2.5 2.5 2 2 1.5 1.5 1 1 0.5 0.5 0 0 1.5 2.0 2.5 3.0 1.5 3.5 2.0 2.5 Rise time L_CMOS = 15 pF 5 4 Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast 4.5 4 3.5 3.5 Fall Time(ns) Rise Time(ns) 3.5 Fall time L_CMOS = 15 pF 5 Tr/Tf mode = Slow Tr/Tf mode = Default Tr/Tf mode = Fast 4.5 3.0 Vcc (V) Vcc (V) 3 2.5 3 2.5 2 1.5 2 1.5 1 1 0.5 0.5 0 0 1.5 2.0 2.5 Vcc (V) 3.0 3.5 1.5 2.0 2.5 3.0 3.5 Vcc (V) Harmonics comparison Center spread ±2.0 % , Hershey-kiss, 25.4 kHz Rise/Fall time = Fast -5 -10 -15 -20 -25 -30 -35 -10 -15 -20 -25 -30 -35 -15 -20 -25 -30 -35 -40 -40 -45 -45 -45 -50 -50 3 5 7 9 11 -50 1 3 5 Normalize to VCC = 3.3 V. Normalize to VCC = 3.3 V. ■Notes: slow See Slow - 7 Harmonics Odd Order Harmonics Odd Order frequency 0.67 M – 20 MHz 20 M – 40 MHz 40 M – 170 MHz fo = 20 MHz, Rise/Fall time=Fast fo = 20 MHz Rise/Fall time=Default fo = 20 MHz, Rise/Fall time=Slow -5 -40 1 comparation of Rise/Fall time Vcc = 3.3 V 0 fo = 20 MHz Vcc = 3.3 V fo = 20 MHz Vcc = 2.5 V fo = 20 MHz Vcc = 1.8 V -5 Attenuation (dBc) Attenuation (dBc) -10 Rise/Fall time = Slow 0 fo = 20 MHz Vcc = 3.3 V fo = 20 MHz Vcc = 2.5 V fo = 20 MHz Vcc = 1.8 V Attenuation (dbc) 0 default See Default See Default See Fast fast See Fast See Fast See Fast 9 11 1 3 5 7 Harmonics Odd Order 9 Normalize to Rise/Fall time = “Fast”. 11 Crystal oscillator Simulation Model ・ IBIS Model is available upon request. Please contact us. Information Required: Oscillator operating condition (i.e. Power Supply, Rise/Fall Time, Temperature) ESD Rating Test items Breakdown voltage Human Body Model (HBM) Machine Model (MM) Charged Device Model (CDM) 2 000 V 250 V 750 V Device Material & Environmental Information Model Package Dimensions # of Pins SG-9101CG SG-9101CE SG-9101CB SG-9101CA 2.5x2.0x0.7 mm 3.2x2.5x1.0 mm 5.0x3.2x1.1 mm 7.0x5.0x1.3 mm 4 4 4 4 Reference Weight (Typ.) 13 mg 25 mg 51 mg 143 mg Terminal Material Terminal Plating W W W W Au Au Au Au Complies With EU RoHS Yes Yes Yes Yes Pb Free MSL Rating Peak Temp. (Max) Yes Yes Yes Yes 1 1 1 1 260 °C 260 °C 260 °C 260 °C SMD products Reflow profile(example) The availability of the heat resistance for reflow conditions of JEDEC-STD-020D.01 is judged individually. Please inquire. Temperature[C] 300 ;+260COVER TP  +255C 250 TL 200 150 ;+217C Tsmax ;+200C Tsmin tp;at least 30s Ramp-up rate +3 °C/s Max. tL Ramp-down rate -6 °C/s Max. 60sto150s ts ;+150C 60sto120s 100 50 Time +25CtoPeak 0 60 120 180 240 300 360 420 480 540 600 660 720 780 Time[s]  Pb free.  Complies with EU RoHS directive. ➢ About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) Crystal oscillator Device Marking Model Factory Programmed Part Marking Field Programmable Part Marking (Blank Samples) SG-9101CG SG-9101CE SG-9101CB SG-9101CA Standard Packing Specification SMD products are packed in the shipping carton as below table in accordance with taping standards EIA-481 and IEC-60286 SG-9101CG SG-9101CE SG-9101CB SG-9101CA 3000 2000 1000 1000 Φ180 Φ180 Φ180 Φ254 Φ60 Φ60 Φ60 Φ100 Marking Marking Standard Packing Quantity & Dimension (Unit mm) Reel Dimension Quantity Model (pcs/Reel) a b Career Tape Dimension W A B C D 9 9 13 17.5 4 4 8 8 5.25 5.25 7.25 9.25 8 8 12 16 1.15 1.4 1.4 2.3 Direction of Feed (L= Left Direction) L L L L PROMOTION OF ENVIRONMENTAL MANAGEMENT SYSTEM CONFORMING TO INTERNATIONAL STANDARDS At Seiko Epson, all environmental initiatives operate under the Plan-Do-Check-Action (PDCA) cycle designed to achieve continuous improvements. The environmental management system (EMS) operates under the ISO 14001 environmental management standard. All of our major manufacturing and non-manufacturing sites, in Japan and overseas, completed the acquisition of ISO 14001 certification. ISO 14000 is an international standard for environmental management that was established by the International Standards Organization in 1996 against the background of growing concern regarding global warming, destruction of the ozone layer, and global deforestation. WORKING FOR HIGH QUALITY In order provide high quality and reliable products and services than meet customer needs, Seiko Epson made early efforts towards obtaining ISO9000 series certification and has acquired ISO9001 for all business establishments in Japan and abroad. We have also acquired ISO/TS 16949 certification that is requested strongly by major automotive manufacturers as standard. ISO/TS16949 is the international standard that added the sector-specific supplemental requirements for automotive industry based on ISO9001. ►Explanation of the mark that are using it for the catalog ►Pb free. ►Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) ►Designed for automotive applications such as Car Multimedia, Body Electronics, Remote Keyless Entry etc. ►Designed for automotive applications related to driving safety (Engine Control Unit, Air Bag, ESC etc ). Notice • • • • • • This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of Seiko Epson. The information about applied data, circuitry, software, usage, etc. written in this material is intended for reference only. Seiko Epson does not assume any liability for the occurrence of customer damage or infringing on any patent or copyright of a third party. This material does not authorize the licensing for any patent or intellectual copyrights. When exporting the products or technology described in this material, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You are requested not to use the products (and any technical information furnished, if any) for the development and/or manufacture of weapon of mass destruction or for other military purposes. You are also requested that you would not make the products available to any third party who may use the products for such prohibited purposes. These products are intended for general use in electronic equipment. When using them in specific applications that require extremely high reliability, such as the applications stated below, you must obtain permission from Seiko Epson in advance. / Space equipment (artificial satellites, rockets, etc.) / Transportation vehicles and related (automobiles, aircraft, trains, vessels, etc.) / Medical instruments to sustain life / Submarine transmitters / Power stations and related / Fire work equipment and security equipment / traffic control equipment / and others requiring equivalent reliability. • All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective. Seiko Epson Corporation